Push Gel 30g /Polyacryl gel - COVER PINK

Product detailed description

- excellent adhesion
- thicker consistency
- suitable for pinching
- suitable for dual forms and templates
- easy filing
- suitable for all types of nails
- acid-free
- odorless
- curing time: UV: 180 sec., LED/Hybrid: 60 sec.

Packaging: 30 g

MODELING with PUSH GEL - STEP BY STEP

In a glass cup, prepare a small amount of auxiliary liquid ALCOHOL, which you will need throughout the time of working with the polygel.

Squeeze an appropriate amount of polygel (about the size of a pea) or more from the tube, depending on the desired length of the modeled nail.

Transfer the polygel to the bottom of the mold using the tip of the polygel manicure tool.

Immerse the brush of the manicure tool in the cup with the prepared alcohol liquid. Evenly stretch and smooth the polygel inside the form so that the material does not extend beyond the edges of the form and creates an even layer for the desired length of the nail.

Remember that the more you wet the brush, the thinner the polygel will be and can be difficult to work with, and conversely, if you skimp on the liquid, the polygel will be too stiff and unyielding to work with.

Place the prepared form with an ideally shaped layer of polygel on the nail and slowly move it to the edge of the nail bed. However, Polygel should not touch the cuticle directly.

Use a plastic clip to secure the mold to your finger. This will prevent the formation of unwanted bubbles on the surface of the polygel layer.

Turn the nail of your palm up and use a brush to smooth out the mound of material that has formed at the bottom of the mold. The width of the modeled nail should be approx. 2 mm.

Again, use a brush dipped in Polygel Liquid or an orange stick to clean the edges of excess material.

Cure the layer under the light of a UV/LED lamp for about 30 seconds, depending on the type and performance of your lamp.

Remove the clip from your finger and carefully peel the form off the nail. Wipe off the resulting sticky layer of exudate with Cleaner.

FINAL EDIT

Use a nail file or nail grinder to achieve the ideal nail shape. Don't forget to trim the underside of the nail as well. Afterwards, clean the nail of excess dust with Cleaner.

For a longer life and fixation of the manicure, apply the final layer of UV TOP COAT DIAMOND.

Cure the layer under the light of a UV/LED lamp for about 30 seconds, depending on the type and performance of your lamp. - excellent adhesion
- thicker consistency
- suitable for pinching
- suitable for dual forms and templates
- easy filing
- suitable for all types of nails
- acid-free
- odorless
- curing time: UV: 180 sec., LED/Hybrid: 60 sec.

Packaging: 30 g

MODELING with PUSH GEL - STEP BY STEP

In a glass cup, prepare a small amount of auxiliary liquid ALCOHOL, which you will need for the entire time of working with the polygel.

Squeeze an appropriate amount of polygel (about the size of a pea) or more from the tube, depending on the desired length of the modeled nail.

Transfer the polygel to the bottom of the mold using the tip of the polygel manicure tool.

Immerse the brush of the manicure tool in the cup with the prepared alcohol liquid. Evenly stretch and smooth the polygel inside the form so that the material does not extend beyond the edges of the form and creates an even layer for the desired length of the nail.

Remember that the more you wet the brush, the thinner the polygel will be and can be difficult to work with, and conversely, if you skimp on the liquid, the polygel will be too stiff and unyielding to work with.

Place the prepared form with an ideally shaped layer of polygel on the nail and slowly move it to the edge of the nail bed. However, Polygel should not touch the cuticle directly.

Use a plastic clip to secure the mold to your finger. This will prevent the formation of unwanted bubbles on the surface of the polygel layer.

Turn the nail of your palm up and use a brush to smooth out the mound of material that has formed at the bottom of the mold. The width of the modeled nail should be approx. 2 mm.

Again, use a brush dipped in Polygel Liquid or an orange stick to clean the edges of excess material.

Cure the layer under the light of a UV/LED lamp for about 30 seconds, depending on the type and performance of your lamp.

Remove the clip from your finger and carefully peel the form off the nail. Wipe off the resulting sticky layer of exudate with Cleaner.

FINAL EDIT

Use a nail file or nail grinder to achieve the ideal nail shape. Don't forget to trim the underside of the nail as well. Afterwards, clean the nail of excess dust with Cleaner.

For a longer life and fixation of the manicure, apply the final layer of UV TOP COAT DIAMOND.

Cure the layer under the light of a UV/LED lamp for about 30 seconds, depending on the type and performance of your lamp.